Removal

3MZ-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL

2. REMOVE NO. 2 ENGINE ROOM SIDE COVER LH

3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

4. REMOVE VVT SENSOR (for Bank 1)






(a) Disconnect the VVT sensor connector.
(b) Remove the bolt, and then remove the VVT sensor.
5. REMOVE VVT SENSOR (for Bank 2)






(a) Disconnect the heated oxygen sensor connector (Bank 2) from the wire harness bracket.






(b) Disconnect the VVT sensor connector.
(c) Remove the bolt, and then remove the VVT sensor.