Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

REMOVAL
HINT:
- Use the same procedure for the RH side and LH side.
- The procedure listed below is for the LH side.

1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent airbag deployment.
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

3. REMOVE REAR DOOR SCUFF PLATE Removal Part 1, Step 1-62

4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP Removal Part 1, Step 1-62

5. REMOVE DECK BOARD ASSEMBLY Removal Part 1, Step 1-62

6. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY Removal Part 1, Step 1-62

7. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY Removal Part 1, Step 1-62

8. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal Part 1, Step 1-62

9. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat) Removal Part 1, Step 1-62

10. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat) Removal Part 1, Step 1-62

11. REMOVE DECK SIDE TRIM BOX LH Removal Part 1, Step 1-62

12. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat) Removal Part 1, Step 1-62

13. REMOVE JACK CARRIER SUPPORT
14. REMOVE JACK CARRIER CUSHION Removal Part 1, Step 1-62

15. REMOVE JACK ASSEMBLY Removal Part 1, Step 1-62

16. REMOVE JACK CARRIER ASSEMBLY Removal Part 1, Step 1-62

17. REMOVE DECK SIDE TRIM BOX RH Removal Part 1, Step 1-62

18. REMOVE REAR MAT Removal Part 1, Step 1-62

19. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat) Removal Part 1, Step 1-62

20. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat) Removal Part 1, Step 1-62

21. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat) Removal Part 1, Step 1-62

22. REMOVE NO. 1 DECK BOARD (w/o Rear No. 2 Seat) Removal Part 1, Step 1-62

23. REMOVE NO. 1 DECK BOARD (w/ Rear No. 2 Seat) Removal Part 1, Step 1-62

24. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat) Removal

25. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear No. 2 Seat)
for LH side: Removal.
for RH side: Removal.
26. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat) Removal

27. REMOVE REAR FLOOR FINISH PLATE Removal Part 1, Step 1-62

28. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System) Removal Part 1, Step 1-62

29. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System) Removal Part 1, Step 1-62

30. REMOVE DECK SIDE TRIM COVER Removal Part 1, Step 1-62

31. REMOVE DECK SIDE TRIM Removal Part 1, Step 1-62

32. REMOVE SIDE TRIM COVER LH (for LH Side without Rear Seat Entertainment System) Removal Part 1, Step 1-62

33. REMOVE POWER OUTLET SOCKET BEZEL (for LH Side with Rear Seat Entertainment System) Removal Part 1, Step 1-62

34. REMOVE SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System) Removal Part 1, Step 1-62

35. REMOVE REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System) Removal

36. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side) Removal Part 1, Step 1-62

37. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side) Removal Part 1, Step 1-62

38. REMOVE REAR POWER POINT SOCKET ASSEMBLY (for LH Side) Removal

39. REMOVE REAR POWER OUTLET SOCKET COVER (for LH Side) Removal

40. REMOVE REAR DECK TRIM COVER (for LH Side without Remote Folding Function) Removal Part 1, Step 1-62

41. REMOVE RECLINING REMOTE CONTROL BEZEL (for LH Side with Remote Folding Function) Removal Part 1, Step 1-62

42. REMOVE ROPE HOOK ASSEMBLY Removal Part 1, Step 1-62

43. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side) Removal Part 1, Step 1-62

44. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) Removal Part 1, Step 1-62

45. REMOVE FRONT DECK SIDE TRIM COVER Removal Part 1, Step 1-62

46. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY Removal

47. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) Removal Part 1, Step 1-62

48. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) Removal Part 1, Step 1-62

49. REMOVE REAR AIRBAG SENSOR






(a) Disconnect the connector from the rear airbag sensor.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the bolt and disengage the pin, and remove the rear airbag sensor.
NOTE: Loosen the bolt while holding the rear airbag sensor because the rear airbag sensor pin (stopper) is easily damaged.