Transmission Position Sensor/Switch: Adjustments

P310 HYBRID TRANSMISSION / TRANSAXLE: SHIFT LEVER POSITION SENSOR: ADJUSTMENT

ADJUSTMENT

1. ADJUST SHIFT LEVER POSITION SENSOR






(a) Loosen the 2 bolts of shift lever position sensor and move the shift lever to the N position.






(b) Align the protruding part and neutral basic line.
NOTE: There is play on the nut stopper side (protruding part). Align the center point of the range of the play with the neutral basic line.





(c) Tighten the 2 bolts in the order shown in the illustration.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
2. INSPECT SHIFT LEVER POSITION SENSOR Testing and Inspection