Diagnosis System

STEERING COLUMN: STEERING LOCK SYSTEM: DIAGNOSIS SYSTEM

DIAGNOSIS SYSTEM

1. DESCRIPTION
(a) DIAGNOSTIC SYSTEM
When troubleshooting a vehicle with a diagnostic system, the only difference from the usual troubleshooting procedure is connecting Techstream to the vehicle and reading various data output from the vehicle's steering lock ECU.
The steering lock ECU records DTCs when the ECU detects a malfunction in the ECU itself or in system circuits.
To check the DTCs, connect the Techstream to the DLC3 on the vehicle. Techstream enables the DTCs to be cleared, the indicators to be activated, and the DATA LIST to be checked.
(b) The steering lock ECU diagnosis information cannot be read directly from the steering lock ECU by Techstream. The diagnosis information from the steering lock ECU is transmitted Techstream via the certification ECU (smart key ECU assembly) using the Controller Area Network (CAN).
2. CHECK DLC3
(a) Check the DLC3.
3. WARNING FUNCTION OF POWER SWITCH INDICATOR






(a) The steering lock ECU blinks the LED indicator of the power switch when any of the following problems occurs in the system:






4. WARNING FUNCTION OF COMBINATION METER
(a) The steering lock ECU displays a warning on the combination meter if any of the following problems occurs in the system: