Power Back Door System

ENGINE HOOD / DOOR: POWER BACK DOOR SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST
HINT: Using the DATA LIST displayed on the Techstream, you can read the value of the switch, sensor, actuator, etc. without parts removal. Reading the DATA LIST as the first step of troubleshooting is one way to shorten the labor time.

(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Read the DATA LIST according to the display on the tester.

Power back door ECU









*1 In case that the "CAUTION" is displayed even without applying resistance in each range, there must be a foreign object caught in that range.
*2 "0.0s" appearing on the display of the Techstream means that a 1-press of the satellite switch operates the power back door.
2. ACTIVE TEST
HINT: Performing the ACTIVE TEST using the Techstream allows you to operate the relay, VSV, actuator, etc. without parts removal. Performing the ACTIVE TEST as the first step of troubleshooting is one way to shorten the labor time. It is possible to display the DATA LIST during the ACTIVE TEST.

(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Perform the ACTIVE TEST according to the display on the tester.

Back Door ECU