Disassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY

DISASSEMBLY

1. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.1
(a) Remove the 2 screws [C] and defroster nozzle duct No. 1.
2. REMOVE SIDE DEFROSTER NOZZLE DUCT NO.2
(a) Remove the 2 screws [C] and defroster nozzle duct No. 2.
3. REMOVE DEFROSTER NOZZLE ASSEMBLY
(a) Remove the 4 screws [C] and defroster nozzle assembly.
4. REMOVE HEATER TO REGISTER DUCT NO.1
(a) Remove the 3 screws [C] and heater to register duct No. 1.
5. REMOVE HEATER TO REGISTER DUCT NO.2
(a) Remove the 3 screws [C] and heater to register duct No. 2.
6. REMOVE HEATER TO REGISTER DUCT NO.3
(a) Remove the 2 screws [C] and heater to register duct No. 3.
7. REMOVE SIDE DEFROSTER NOZZLE LH
8. REMOVE SIDE DEFROSTER NOZZLE RH
9. REMOVE INSTRUMENT PANEL FINISH PANEL RETAINER LOWER NO.3
(a) Remove the 2 screws [C] and instrument panel finish panel retainer lower No. 3.
10. REMOVE INSTRUMENT CLUSTER FINISH PANEL REINFORCEMENT
(a) Remove the screw [C] and instrument cluster finish panel reinforcement.
11. REMOVE DEFROSTER DUCT BRACKET NO.1
(a) Remove the screw [C] and defroster duct bracket No. 1.
12. REMOVE INSTRUMENT FINISH PANEL RETAINER LOWER
(a) Remove the screw [C] and instrument finish panel retainer lower.
13. REMOVE INSTRUMENT FINISH PANEL RETAINER LOWER NO.2
(a) Remove the screw [C] and instrument finish panel retainer lower No. 2.
14. REMOVE INSTRUMENT PANEL FINISH PANEL RETAINER NO.1
(a) Remove the 2 screws [C] and instrument panel finish panel retainer No. 1.
15. REMOVE INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY NO.2
16. REMOVE ANTENNA CORD SUB-ASSEMBLY
17. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
18. REMOVE INSTRUMENT PANEL WIRE NO.2
(a) Remove the 2 screws [C].
(b) Disengage the 7 clamps and remove the instrument panel wire No. 2.





19. REMOVE INSTR PNL PASS L/DOOR AIR BAG ASSEMBLY Removal