Removal

AXLE: REAR AXLE HUB AND BEARING (for 4WD): REMOVAL

REMOVAL
HINT: Replace the RH side by the same procedures as the LH side.

1. REMOVE REAR WHEEL
2. REMOVE REAR AXLE SHAFT LH NUT Removal

3. SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY LH
(a) Removing the 2 bolts, separate the rear disc brake caliper assembly LH.
4. REMOVE REAR DISC
5. SEPARATE SPEED SENSOR REAR LH
(a) Removing the bolt, separate the speed sensor rear LH.
NOTICE:
- Be careful not to damage the speed sensor.
- Prevent foreign matter from attaching to the speed sensor.

6. REMOVE REAR DRIVE SHAFT ASSEMBLY LH Removal

7. REMOVE REAR AXLE HUB & BEARING ASSEMBLY LH






(a) Remove the 4 bolts and hub & bearing assembly LH.