Installation

2GR-FE IGNITION: IGNITION COIL AND SPARK PLUG: INSTALLATION

INSTALLATION

1. INSTALL SPARK PLUG






(a) Install the 6 spark plugs.
Torque: 18 Nm (183 kgf-cm, 13 ft-lbf)
2. INSTALL IGNITION COIL ASSEMBLY






(a) Install the 6 ignition coils with the 6 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(b) Connect the 6 ignition coil connectors.
3. INSTALL NO. 1 SURGE TANK STAY
NOTE: DO NOT apply oil to the bolt listed below:









(a) Install the No. 1 surge tank stay with the bolt.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)






(b) Install the 2 bolts, 2 clamps, and nut.
Torque: 8.3 Nm (84 kgf-cm, 73 in-lbf)
4. INSTALL INTAKE AIR SURGE TANK ASSEMBLY Installation

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

6. ADD ENGINE COOLANT Service and Repair

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. INSPECT FOR ENGINE COOLANT LEAK Testing and Inspection

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

10. INSTALL COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT Installation

11. INSTALL NO. 1 COWL TOP TO COWL BRACE INNER Installation

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

13. INSTALL FRONT WIPER ARM LH

14. INSTALL FRONT WIPER ARM RH