Removal

2GR-FE IGNITION: IGNITION COIL AND SPARK PLUG: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. DRAIN ENGINE COOLANT
3. REMOVE FRONT WIPER ARM HEAD CAP

4. REMOVE FRONT WIPER ARM RH

5. REMOVE FRONT WIPER ARM LH

6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

8. REMOVE NO. 1 COWL TOP TO COWL BRACE INNER Removal

9. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER FRONT Removal

10. REMOVE NO. 1 ENGINE UNDER COVER
11. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

13. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal

14. REMOVE NO. 1 SURGE TANK STAY






(a) Remove the 2 bolts and nut and disconnect the 2 harness clamps.






(b) Remove the bolt and No. 1 surge tank stay.
15. REMOVE IGNITION COIL ASSEMBLY






(a) Disconnect the 6 ignition coil connectors.
(b) Remove the 6 bolts and 6 ignition coils.
16. REMOVE SPARK PLUG






(a) Remove the 6 spark plugs.