Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

3. REMOVE REAR DOOR SCUFF PLATE RH Removal

4. REMOVE REAR DOOR WEATHERSTRIP RH Removal

5. REMOVE BACK DOOR WEATHERSTRIP Removal

6. REMOVE BACK DOOR SCUFF PLATE Removal

7. REMOVE LAP BELT OUTER ANCHOR COVER
8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH Removal

9. REMOVE AIR DUCT ASSEMBLY
(a) Remove the screw and the air duct assembly.
10. REMOVE REAR AIRBAG SENSOR LH
(a) Disconnect the connector from the rear airbag sensor LH.






(b) Remove the 2 bolts and the rear airbag sensor LH.