Removal

STEERING COLUMN: STEERING COLUMN ASSEMBLY: REMOVAL

REMOVAL

1. PRECAUTION Service Precautions

2. DISCONNECT BATTERY NEGATIVE TERMINAL
Wait for 90 seconds after disconnecting the battery terminal to prevent the airbag working.
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING WHEEL COVER LOWER NO.2 Removal

5. REMOVE STEERING WHEEL COVER LOWER NO.3 Removal

6. REMOVE HORN BUTTON ASSEMBLY Removal

7. REMOVE STEERING WHEEL ASSEMBLY






(a) Remove the steering wheel assembly set nut.
(b) Put matchmarks on the steering wheel assembly and main shaft assembly.
(c) Using SST, remove the steering wheel assembly.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021
8. REMOVE STEERING COLUMN COVER






(a) Remove the 2 screws and steering column cover.
9. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal

10. REMOVE HEADLIGHT DIMMER SWITCH ASSEMBLY Removal

11. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY Removal

12. REMOVE FRONT DOOR SCUFF PLATE LH
13. REMOVE COWL SIDE TRIM BOARD LH
14. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER LH Removal

15. REMOVE INSTRUMENT PANEL SAFETY PAD INSERT SUB-ASSEMBLY NO.1 Removal

16. REMOVE HEATER TO FOOT DUCT NO.3
(a) Disengage the 3 claws and remove the sir duct No. 3.
17. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY






(a) Loosen the bolt.






(b) Release the 3 clips and separate the dust cover.






(c) Align the matchmarks on the steering intermediate shaft assembly and steering gear assembly.
(d) Remove the bolt and separate the steering intermediate shaft assembly.
18. REMOVE STEERING COLUMN ASSEMBLY






(a) Disconnect the connectors and wire harness clamps.
(b) Remove the 3 bolts and steering column assembly from the instrument panel reinforcement assembly.