Disassembly

U151F AUTOMATIC TRANSAXLE: DIFFERENTIAL CASE: DISASSEMBLY

DISASSEMBLY

1. REMOVE FRONT DIFFERENTIAL RING GEAR

(a) Place the match-marks on the ring gear and differential case.

(b) Remove the 16 bolts.

(a) Remove the differential LH case from the differential case assembly.

(b) Remove the differential case No.2 from the differential case LH.

(c) Remove the front differential side gear, front differential side gear thrust washer, conical spring and center differential side gear thrust washer No.2 from the differential case LH.

(d) Using a snap ring expander, remove the pinion shaft spacer snap ring.

(e) Using a pin punch and hammer, remove 3 straight pins.

(f) Remove the center differential pinion shaft and 2 differential pinion shafts.

(g) Remove 4 front differential pinions, 4 front differential pinion thrust washers, front differential pinion shaft holder, front differential planetary ring and differential side gear thrust washer No.1.
3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

(a) Using SST, remove the front differential case rear tapered roller bearing from the differential case.
SST: 09950-00020
SST: 09950-00030
SST: 09950-60010
09951-00480

(b) Using SST, remove the front differential case rear tapered roller bearing outer race and differential case washer.
SST: 09308-00010
4. REMOVE CENTER DIFFERENTIAL PINION

(a) Using "TORX" socket (T50), remove the 15 bolts.

(b) Place the matchmarks on the differential intermediate case and differential case.
(c) Remove the differential intermediate case from the differential case RH.

(d) Remove the center differential side gear, conical spring washer and center differential side gear thrust washer No.1 RH from the differential case RH.

(e) Remove the differential spider, 5 center differential pinions and 5 center differential pinion thrust washers from the differential intermediate case.
5. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

(a) Using SST, remove the front differential case front tapered roller bearing from the differential case.
SST: 09950-00020
SST: 09950-00030
SST: 09950-60010
09951-00600

(b) Using SST, remove the front differential case front tapered roller bearing outer race and differential case washer.
SST: 09308-00010
6. REMOVE TRANSAXLE HOUSING OIL SEAL

(a) Using SST, remove the oil seal.
SST: 09950-70010
09951-07100
SST: 09649-17010
7. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

(a) Using SST, remove the oil seal.
SST: 09950-70010
09951-07100
SST: 09608-10010