How To Proceed With Troubleshooting

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM (w/ Jam Protection Function): HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT: Troubleshoot in accordance with the following procedures.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK
NEXT -- Continue to next step.
3. PROBLEM SYMPTOMS TABLE
(a) When problem is not listed on problem symptoms table, proceed to A.
(b) When problem is listed on problem symptoms table, proceed to B.
B -- GO TO STEP 5
A -- Continue to next step.
4. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM
(a) Data list / Active test.
HINT: Scan Tool Testing and Procedures
(b) Circuit inspection.
NEXT -- Continue to next step.
5. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
6. RESET POWER WINDOW REGULATOR MOTOR
(a) If the AUTO switch (driver side switch) light of the power window master switch is blinking after the repair, reset the power window motor Programming and Relearning.
NEXT -- END