Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL LOWER RADIATOR GRILLE






(a) Engage the 16 claws to install the lower radiator grille to the front bumper cover.
2. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)






(a) Engage the 2 pins to install the front bumper hole cover LH to the front bumper cover.
3. INSTALL FRONT BUMPER HOLE COVER RH (w/o Fog Light)
HINT: Perform the same procedure as for the LH side.

4. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) Installation

5. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT: Perform the same procedure as for the LH side.

6. INSTALL FRONT BUMPER EMBLEM






(a) Engage the 3 claws to install the front bumper emblem to the upper radiator grille.
7. INSTALL UPPER RADIATOR GRILLE






(a) Engage the 10 claws to install the upper radiator grille to the radiator grille.
8. INSTALL RADIATOR GRILLE






(a) Engage the 4 claws to install the radiator grille to the front bumper cover.
(b) Install the 2 bolts and the 2 screws.
Bolt - Torque: 5.4 Nm (54 kgf-cm, 48 in-lbf)
Screw - Torque: 5.0 Nm (51 kgf-cm, 44.3 in-lbf)
9. INSTALL NO. 1 ULTRASONIC SENSOR (LH side) (w/ Clearance Sonar System) Installation

10. INSTALL NO. 1 ULTRASONIC SENSOR (RH side) (w/ Clearance Sonar System)
HINT: Perform the same procedure as for the LH side.

11. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER Installation

12. INSTALL FRONT BUMPER SIDE SUPPORT LH






(a) Engage the 2 clips to install the front bumper side support LH.
(b) Install the screw.
Torque: 7.0 Nm (71 kgf-cm, 62.0 in-lbf)
13. INSTALL FRONT BUMPER SIDE SUPPORT RH
HINT: Perform the same procedure as for the LH side.

14. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY






(a) Install the front bumper reinforcement sub-assembly with the 6 bolts.
Torque: 50 Nm (510 kgf-cm, 37 ft-lbf)
15. INSTALL FRONT BUMPER ENERGY ABSORBER