Removal

EXTERIOR: FRONT BUMPER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT BUMPER ASSEMBLY






(a) Remove the 4 screws and separate the fender liner from the front bumper assembly.






(b) Remove the 8 screws and separate the engine under cover from the front bumper assembly.






(c) Remove the 5 clips.






(d) Disengage the claws on the left and right sides of the front bumper and pull the front bumper toward the front of the vehicle as shown in the illustration.
- Apply protective tape to the bottom part of the front fender to prevent it from being damaged.
- Disconnect the connectors if necessary.