Removal

BRAKE: FRONT BRAKE: REMOVAL

REMOVAL
HINT: Remove the RH side by the same procedure as the LH side.

1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
NOTE: Wash the brake fluid off immediately if it attaches to any painted surface.

3. REMOVE FRONT DISC BRAKE CYLINDER SUB-ASSEMBLY
(a) Remove the union bolt and 2 gaskets from the front disc brake cylinder sub-assembly, then disconnect the flexible hose.






(b) Hold the front disc brake cylinder slide pin and remove the 2 bolts.
4. REMOVE DISC BRAKE PAD KIT FRONT (PAD ONLY)
(a) Remove the disc brake pad kit front from the front disc brake cylinder mounting LH.
5. REMOVE ANTI SQUEAL SHIM KIT FRONT
(a) Remove the anti squeal shim and pad wear indicator plate from the each pad.
6. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE
(a) Remove the front disc brake pad support plate (No. 1) and front disc brake pad support plate (No. 2) from the front disc brake cylinder mounting LH.
7. REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN






(a) Remove the front disc brake cylinder slide pin (No. 1) and front disc brake cylinder slide pin (No. 2) from the front disc brake cylinder mounting LH.
8. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH






(a) Using a screwdriver, remove the front disc brake cylinder slide bush from the front disc brake cylinder slide pin (No. 2).
NOTE: Do not damage the front disc brake cylinder slide pin (No. 2).

9. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING LH






(a) Remove the 2 bolts and front disc brake cylinder mounting LH.