Dome Lamp: Testing and Inspection

LIGHTING: ROOM LIGHT ASSEMBLY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. ROOM LIGHT ASSEMBLY NO.2
(a) Check that the resistance exists between the terminals.
Resistance:
Below 1 Ohms
2. INTERIOR DOME LIGHT SWITCH ASSEMBLY
(a) Check that there is resistance between the terminals at each switch position as shown in the chart.
Resistance:






(b) Inspect illumination operation.
(1) Connect the battery positive (+) lead to the terminal 4 and the battery negative (-) lead to the terminal 1, and check that the illumination comes on.