Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL
NOTE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Registration.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT: Refer to the instructions for REMOVAL of the instrument panel safety pad Removal.

3. REMOVE TIRE PRESSURE WARNING ECU






(a) Remove the screw.






(b) Disconnect the connector and remove the tire pressure warning ECU.