Camshaft Bearing

Camshaft Bearing Cap (for Bank 1)





Tighten the 8 bolts in the order shown in the illustration.

Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Camshaft Bearing Cap (for Bank 2)






Tighten the 8 bolts in the order shown in the illustration.

Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

Camshaft Housing Sub-assembly






Tighten the 12 bolts in the order shown in the illustration.

Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)






Tighten the 8 bolts in the order shown in the illustration.

Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)