Pinout Values and Diagnostic Parameters

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM:

TERMINALS OF ECU

1. CHECK COWL SIDE JUNCTION BLOCK RH ASSEMBLY (MULTIPLEX NETWORK BODY ECU)





(a) Disconnect the 1A, 1C, 1F, 1H, 1I, 1J, and 1K driver side J/B connectors.
(b) Measure the resistance and voltage of the wire harness side connectors.

Standard:





- If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the driver side J/B connectors.
(d) Measure the voltage of the connectors.

Standard:





- If the result is not as specified, there may be a malfunction on the driver side J/B assembly (multiplex network body ECU).