Timing Components: Specifications
NO. 1 CHAIN TENSIONERTorque: 10 Nm (102 kgf-cm, 7 ft-lbf)
NO. 2 CHAIN TENSIONER
Torque: 18 Nm (185 kgf-cm, 13 ft-lbf)
CRANKSHAFT PULLEY
Using SST, hold the crankshaft pulley and tighten the crankshaft pulley bolt.
SST: 09213-54015
91651-60855
SST: 09330-00021
Torque: 260 Nm (2,651 kgf-cm, 192 ft-lbf)
TIMING CHAIN COVER
- Align the oil pump's drive rotor spline and the crankshaft as shown in the illustration. Install the spline and chain cover to the crankshaft.
- Temporarily install the the timing chain cover with the 19 bolts and 2 nuts, but do not tighten the bolts and nuts yet.
- Excluding bolts A, fully tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
HINT: Bolt length:
75 mm (2.95 in.) for bolt A (M10)
75 mm (2.95 in.) for bolt B (M8)
87 mm (3.43 in.) for bolt C
95 mm (3.74 in.) for bolt D
- Fully tighten the bolts labeled A in this order: Area 2 and Area 3.
Torque: 46 Nm (469 kgf-cm, 34 ft-lbf)
- Fully tighten the bolts labeled E in Area 4.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
HINT: Bolt length: 35 mm (1.37 in.) for bolt E
