Installation

A340E AUTOMATIC TRANSMISSION: ATF TEMPERATURE SENSOR:

INSTALLATION

1. INSTALL TEMPERATURE SENSOR
(a) Coat a new O-ring with ATF and install it onto the temperature sensor.
(b) Install the temperature sensor.
Torque: 29 Nm (300 kgf-cm, 22 ft-lbf)
(c) Connect the temperature sensor connector.
2. CONNECT NO. 1 OIL COOLER INLET TUBE





(a) Using union nut wrench, tighten oil cooler inlet tube No. 1.
Torque: 34 Nm (350 kgf-cm, 25 ft-lbf)





(b) Install the 3 clamps and 3 bolts.
Torque: 12 Nm (122 kgf-cm, 8.9 ft-lbf)
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
3. INSPECT AUTOMATIC TRANSMISSION FLUID (Procedures)