Disassembly

R155 MANUAL TRANSMISSION: INPUT SHAFT:

DISASSEMBLY





1. REMOVE NO. 2 SYNCHRONIZER RING
(a) Remove synchronizer ring No. 2 from the input shaft.





2. REMOVE INPUT SHAFT BEARING
(a) Remove the input shaft bearing from the input shaft.





3. REMOVE FRONT BEARING SHAFT SNAP RING
(a) Using a snap ring expander, remove the front bearing shaft snap ring from the input shaft.





4. REMOVE INPUT SHAFT FRONT BEARING
(a) Using SST and a press, remove the input shaft front bearing FR from the input shaft.
SST: 09950-00020