Installation

AUDIO / VISUAL: RADIO ANTENNA HOLDER:

INSTALLATION

1. INSTALL WITH HOLDER ANTENNA ASSEMBLY
(a) Tie the string inside the pillar to the new antenna assembly (with holder).
(b) Using the string, fit the antenna assembly (with holder) into the pillar.

(d) Install the antenna ornament with the nut.

(e) Install the with holder antenna assembly with the bolt.
2. INSTALL PULL TOP ANTENNA POLE SUB - ASSEMBLY (Installation)

3. INSTALL FRONT PILLAR GARNISH RH ()

4. INSTALL ASSIST GRIP SUB-ASSEMBLY ()

5. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH (Installation)

6. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (Installation)

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)