Removal

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR COMBINATION LIGHT ASSEMBLY





(a) Remove the 2 bolts.
(b) Slide the tail light (rear combination light) assembly LH toward the rear of the vehicle and release the 2 pins.





(c) Disconnect the connector, then remove the tail light (rear combination light) assembly LH.
(d) Remove the wire harness clamp.





(e) To remove the 3 light bulb sockets and 3 bulbs, turn them in the direction indicated by the arrow in the illustration.
(f) Remove the 3 light bulbs from the 3 light sockets.