Installation

LIGHTING: HEADLIGHT ASSEMBLY:

INSTALLATION

1. INSTALL NO. 1 HEADLIGHT, BULB





(a) Install the No. 1 headlight bulb.





(b) Lock the set spring by moving it in the direction indicated by the arrow in the illustration.





(c) Install the socket cover.
2. INSTALL CLEARANCE LIGHT BULB
(a) Install the clearance light bulb into the light socket.





(b) To install the clearance light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.
3. INSTALL FRONT TURN SIGNAL LIGHT BULB
(a) Install the front turn signal light bulb into the light socket.





(b) To install the front turn signal light bulb socket and bulb, turn them in the direction indicated by the arrow in the illustration.
4. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the 3 connectors.





(b) Install the LH headlight assembly with the bolt and 3 screws.
Torque: 2.0 Nm (20 kgf-cm, 17 in-lbf)
5. INSTALL FRONT BUMPER FILLER (Installation)

6. INSTALL FRONT BUMPER COVER (Installation)

7. INSTALL RADIATOR GRILLE (Installation)

8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
9. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (Adjustments)

10. PREPARATION FOR HEADLIGHT AIMING (for Using a Tester) (Adjustments)

11. PREPARATION FOR HEADLIGHT AIMING (for Using a Screen) (Adjustments)

12. HEADLIGHT AIMING INSPECTION (Adjustments)

13. HEADLIGHT AIMING ADJUSTMENT (Adjustments)