Installation

AXLE: REAR AXLE HUB BOLT:

INSTALLATION





1. INSTALL REAR AXLE HUB BOLT
(a) Install a new hub bolt through the axle hub.
(b) Install the washer plate, as shown in the illustration, through the hub bolt, and install the hub bolt by tightening the hub nut.
2. APPLY HIGH TEMPERATURE GREASE (Reassembly)

3. INSTALL REAR BRAKE SHOE (Reassembly)

4. INSTALL FRONT BRAKE SHOE (Reassembly)

5. INSPECT REAR DRUM BRAKE INSTALLATION (Reassembly)

6. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY (Installation)

7. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (Installation)

8. INSTALL REAR WHEEL
Torque: 113 Nm (1,152 kgf-cm, 83 ft-lbf)
9. INSPECT PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) (Adjustments)

10. INSPECT PARKING BRAKE LEVER TRAVEL (for Manual Transmission) (Adjustments)

11. ADJUST PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) (Adjustments)

12. ADJUST PARKING BRAKE LEVER TRAVEL (for Manual Transmission) (Adjustments)