Installation

POWER OUTLET SOCKET:

INSTALLATION

1. INSTALL POWER POINT SOCKET ASSEMBLY
(a) Align the socket with the notch on the power point socket cover, and push the power point socket assembly firmly into the cover to install it.
2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY (Installation)

3. INSTALL LOWER INSTRUMENT PANEL LH (Installation)

4. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (Installation)

5. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Installation)

6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (Installation)

7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (Reassembly)

8. INSTALL RADIO RECEIVER ASSEMBLY (Installation)

9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (Installation)

10. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) (Installation)

11. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) (Installation)

12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) (Installation)

13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) (Installation)

14. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) (Installation)

15. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) (Installation)

16. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) (Installation)

17. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) (Installation)

18. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) (Installation)

19. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) (Installation)

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)