Vehicle Stability Control System
BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:
DIAGNOSTIC TROUBLE CODE CHART
DTC Chart of ABS:
C0200 - C0246:
C0256 - C1236:
C1238 - C1246:
C1248 - C1257:
C1268 - C1381:
(*1), (*2):
Even after the trouble areas are repaired, the ABS warning light will not go off unless the following operations are performed.
- (*1):
1. Drive the vehicle at 20 km/h (12 mph) for 30 seconds or more and check that the ABS warning light goes off.
2. Clear the DTC.
- (*2):
1. Keep the vehicle stationary for 5 seconds or more and depress the brake pedal several times.
2. Repeat the above operation 3 times or more and check that the ABS warning light goes off.
3. Clear the DTC.
(*3): 4WD
(*4): Skid control (VSC control) buzzer sounds.
HINT: In some cases, Techstream cannot be used when the ABS warning light remains on.
DTC Chart of VSC:
C1201 - C1232:
C1234 - C1380:
HINT: In some cases, Techstream cannot be used when the VSC TRAC warning light remains on.