Installation

BRAKE: REAR BRAKE:

INSTALLATION

1. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
(a) Install a new drum gasket onto the rear brake drum.
(b) Install the rear brake drum.





2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE
(a) Provisionally install the hub nuts.
(b) Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
(c) Using a screwdriver, release the adjuster 15 notches.
(d) Install the hole plug.
3. FILL RESERVOIR WITH BRAKE FLUID (w/ VSC) (Brake Fluid (w/ VSC))

4. FILL RESERVOIR WITH BRAKE FLUID (w/o VSC) (Brake Fluid (w/o VSC))

5. BLEED MASTER CYLINDER (w/o VSC) (Brake Fluid (w/o VSC))

6. BLEED BRAKE LINE (w/ VSC) (Brake Fluid (w/ VSC))

7. BLEED BRAKE LINE (w/o VSC) (Brake Fluid (w/o VSC))

8. CHECK FLUID LEVEL IN RESERVOIR (w/ VSC) (Brake Fluid (w/ VSC))

9. CHECK FLUID LEVEL IN RESERVOIR (w/o VSC) (Brake Fluid (w/o VSC))

10. CHECK FOR BRAKE FLUID LEAKAGE
11. INSTALL REAR WHEEL
Torque: 113 Nm (1152 kgf-cm, 83 ft-lbf)
12. INSPECT PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) (Adjustments)

13. INSPECT PARKING BRAKE LEVER TRAVEL (for Manual Transmission) (Adjustments)

14. ADJUST PARKING BRAKE PEDAL TRAVEL (for Automatic Transmission) (Adjustments)

15. ADJUST PARKING BRAKE LEVER TRAVEL (for Manual Transmission) (Adjustments)