Installation

HORN: HORN SYSTEM:

INSTALLATION





1. INSTALL HIGH PITCHED HORN ASSEMBLY
(a) Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.
Torque: 9.9 Nm (101 kgf-cm, 88 in-lbf)
(b) Connect the connector.
2. INSTALL LOW PITCHED HORN ASSEMBLY
(a) Place the stay onto the baffle part in the upper radiator support, and then install the horn with the bolt.
Torque: 9.9 Nm (101 kgf-cm, 88 in-lbf)
(b) Connect the connector.
3. INSTALL RADIATOR GRILLE (Installation)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)