Map Light: Testing and Inspection

LIGHTING: MAP LIGHT ASSEMBLY:

INSPECTION





1. INSPECT MAP LIGHT ASSEMBLY
(a) Check the resistance.
(1) Measure the resistance using an ohmmeter, and check the results in accordance with the value(s) in the table below.
Standard:





If the result is not as specified, replace the map light assembly.
(b) Check the light operation.
(1) Connect the battery positive (+) lead to terminal 1 and the battery positive (-) lead to terminal 2, then check that the light comes on.
Standard:
Light comes on.
If the light does not come on, replace the bulb.