Installation

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY:

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY
(a) Install the 3 light bulbs into the 3 light sockets.





(b) To install the 3 light bulb sockets and 3 bulbs, turn them in the direction indicated by the arrow in the illustration.
(c) Install the wire harness clamp.





(d) Connect the connector, then install the tail light (rear combination light) assembly LH with the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)