Accelerator Pedal: Testing and Inspection

1GR-FE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL:

ON-VEHICLE INSPECTION

1. INSPECT ACCELERATOR PEDAL ROD
(a) Check the voltage.
(1) Turn the ignition switch to ON.
(2) Turn the Techstream ON.
(3) Start the engine and warm it up.
(4) Enter the following menu items:
Select: Powertrain / Engine and ECT / Data List / Accelerator Position No. 1, No. 2.
(5) Operate the accelerator pedal, then check that the Accelerator Position No. 1 and Accelerator Position No. 2 values are within the specifications.
Standard:
Accelerator Position No. 1





Accelerator Position No. 2





If the result is not as specified, check the accelerator pedal rod, wire harness and ECM.