Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING ECU
(a) Install the tire pressure warning ECU with the 2 screws.
Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
(b) Connect the connector.
2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY (Installation)

3. INSTALL LOWER INSTRUMENT PANEL LH (Installation)

4. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH (Installation)

5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (Installation)

6. INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY (Installation)

7. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Installation)

8. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (Installation)

9. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (Reassembly)

10. INSTALL RADIO RECEIVER ASSEMBLY (Installation)

11. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (Installation)

12. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Bench Seat Type) (Installation)

13. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Bench Seat Type) (Installation)

14. INSTALL FRONT CONSOLE BOX (for Manual Transmission on Separate Seat Type) (Installation)

15. INSTALL FRONT CONSOLE BOX (for Automatic Transmission on Separate Seat Type) (Installation)

16. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY (for Automatic Transmission on Separate Seat Type) (Installation)

17. INSTALL REAR CONSOLE BOX ASSEMBLY (for Separate Seat Type) (Installation)

18. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Manual Transmission on Separate Seat Type) (Installation)

19. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY (for Automatic Transmission on Separate Seat Type) (Installation)

20. INSTALL INSTRUMENT PANEL HOLE COVER (for Manual Transmission) (Installation)

21. INSTALL INSTRUMENT PANEL UNDER TRAY (for Automatic Transmission) (Installation)

22. INSTALL COWL SIDE TRIM BOARD LH (for Regular Cab) ()

23. INSTALL COWL SIDE TRIM BOARD LH (for Access Cab) (Installation)

24. INSTALL COWL SIDE TRIM BOARD LH (for Double Cab) (Installation)

25. INSTALL FRONT DOOR SCUFF PLATE LH (for Regular Cab) ()

26. INSTALL FRONT DOOR SCUFF PLATE LH (for Access Cab) (Installation)

27. INSTALL FRONT DOOR SCUFF PLATE LH (for Double Cab) (Installation)

28. INSTALL FRONT FLOOR FOOTREST (Installation)

29. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)

30. REGISTER TRANSMITTER ID
(a) Register the transmitter ID (Registration).
31. PERFORM INITIALIZATION (for Tire Pressure Warning System)
(a) When the ECU is replaced, perform initialization (Initialization).