Removal

SUPPLEMENTAL RESTRAINT SYSTEM: SIDE AIRBAG SENSOR:

REMOVAL

HINT: Use the same procedures for the RH side and LH side.

1. PRECAUTION (Service Precautions)

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

4. REMOVE REAR DOOR SCUFF PLATE LH (Removal)

5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH (Removal)

6. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH (Removal)

7. REMOVE LAP BELT OUTER ANCHOR COVER (Removal)

8. REMOVE CENTER PILLAR LOWER GARNISH LH (Removal)





9. REMOVE SIDE AIRBAG SENSOR
(a) Remove the bolt and the side airbag sensor.
(b) Disconnect the connector from the side airbag sensor.