Installation

AUDIO / VISUAL: STEERING PAD SWITCH:

INSTALLATION

1. INSTALL STEERING PAD SWITCH LH

(a) Install the steering pad switch cable onto the steering pad switch LH while holding the connector cover.

(b) Hold the connector cover down to engage the 2claws as shown in the illustration.

(d) Engage the 2 pins and install the steering pad switch LH.

(e) Install the screw.
(f) Connect the connector.
2. INSTALL HORN BUTTON ASSEMBLY (Installation)

3. INSTALL NO. 3 LOWER STEERING WHEEL COVER (Installation)

4. INSTALL NO. 2 LOWER STEERING WHEEL COVER (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
6. INSPECT HORN BUTTON ASSEMBLY (Steering Pad)

7. INSPECT SRS WARNING LIGHT (Installation)