Removal

BRAKE CONTROL: STEERING ANGLE SENSOR (w/ VSC):

REMOVAL

1. PRECAUTION (Service Precautions)

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(a) Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING WHEEL COVER LOWER NO. 2 (Removal)

5. REMOVE STEERING WHEEL COVER LOWER NO. 3 (Removal)

6. REMOVE STEERING PAD ASSEMBLY (Removal)

7. REMOVE STEERING WHEEL ASSEMBLY (Removal)

8. REMOVE STEERING COLUMN COVER LOWER (Removal)

9. REMOVE STEERING COLUMN COVER UPPER (Removal)

10. REMOVE SPIRAL CABLE (Removal)





11. REMOVE STEERING SENSOR
(a) Release 6 claw fittings and remove the steering sensor from the spiral cable.