Installation

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG CUT-OFF SWITCH:

INSTALLATION

1. INSTALL AIRBAG CUT-OFF SWITCH





(a) Engage the 2 claws of the cut off switch with the instrument cluster finish panel sub-assembly center.
(b) Attach the connector to the airbag cut off switch.
2. INSTALL SWITCH BASE HOLE COVER





(a) Disengage the 3 claws and install the switch base hole cover.
3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Installation)

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Installation)

5. INSTALL INSTRUMENT LOWER PANEL LH (Installation)

6. INSTALL NO.1 LOWER INSTRUMENT PANEL FINISH PANEL (Installation)

7. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (Reassembly)

8. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (Installation)

9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (Installation)

10. INSTALL INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) (Installation)

11. INSTALL INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) (Installation)

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
13. INSPECT SRS WARNING LIGHT (Diagnosis System)