Removal

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG CUT-OFF SWITCH:

REMOVAL

1. PRECAUTION (Service Precautions)

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE INSTRUMENT PANEL UNDER TRAY (for Pedal Type Parking Brake) (Removal)

4. REMOVE INSTRUMENT PANEL HOLE COVER (for Lever Type Parking Brake) (Removal)

5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (Removal)

6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (Removal)

7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (Disassembly)

8. REMOVE NO.1 LOWER INSTRUMENT PANEL FINISH PANEL (Removal)

9. REMOVE INSTRUMENT LOWER PANEL LH (Removal)

10. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Removal)

11. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (Removal)

12. REMOVE SWITCH BASE HOLE COVER





(a) Disengage the 3 claws and remove the switch base hole cover.
13. REMOVE AIRBAG CUT OFF SWITCH





(a) Disconnect the airbag cut off switch connector.
(b) Remove the instrument cluster finish panel sub-assembly center while holding the 2 claws of the airbag cut off switch.