Camshaft Bearing
CAMSHAFT BEARING CAP (BANK 1)
Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
Torque: 24 Nm (245 kgf-cm, 18 ft-lbf)
NO. 2 CAMSHAFT BEARING CAP (BANK 1)
Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
Torque: 24 Nm (245 kgf-cm, 18 ft-lbf)
NO. 3 CAMSHAFT BEARING CAP (BANK 2)
Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
Torque: 24 Nm (245 kgf-cm, 18 ft-lbf)
NO. 4 CAMSHAFT BEARING CAP (BANK 2)
Using several steps, uniformly install and tighten the 8 bearing cap bolts in the sequence shown in the illustration.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
Torque: 24 Nm (245 kgf-cm, 18 ft-lbf)