Valve Clearance

Valve clearance (Cold):
Intake 0.15 to 0.25 mm (0.006 to 0.010 in.)
Exhaust 0.29 to 0.39 mm (0.011 to 0.015 in.)


Determine the replacement valve lifter size according to the following formulas and charts:





- Using a micrometer, measure the thickness of the removed lifter.
- Calculate the thickness of a new lifter so that the valve clearance comes within the specified value.
T: Thickness of removed lifter
A: Measured valve clearance
N: Thickness of new lifter
Intake: N = T + (A - 0.20 mm (0.008 in.))
Exhaust: N = T + (A - 0.30 mm (0.012 in.))

- Select a new lifter with a thickness as close as possible to the calculated value.

HINT: Lifters are available in 35 sizes in increments of 0.020 mm (0.0008 in.), from 5.060 mm (0.1992 in.) to 5.740 mm (0.2260 in.).