Disposal

SUSPENSION: FRONT SHOCK ABSORBER WITH COIL SPRING (for 4WD and Pre-Runner): DISPOSAL

DISPOSAL





1. DISPOSE OF SHOCK ABSORBER ASSEMBLY FRONT
(a) Fully extend the shock absorber piston rod, and fix it at an angle in a vise or similar tool.
(b) Using a drill or similar tool, slowly make a hole in the shaded area shown in the illustration, and discharge the gas inside.

CAUTION:
- The gas is colorless, odorless and harmless.
- Since the discharged gas may cause chips to scatter, cover the drill with a shop rag when making the hole.