Removal

CLUTCH UNIT (for RA60F):

REMOVAL

1. REMOVE MANUAL TRANSMISSION UNIT ASSEMBLY






2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY
(a) Remove the clutch release fork together with the clutch release bearing from the transmission assembly.
3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
(a) Remove the clutch release bearing assembly from the clutch release fork.
4. REMOVE RELEASE FORK SUPPORT
(a) Remove the release fork support from the transaxle assembly.
5. REMOVE RELEASE BEARING HUB CLIP






6. REMOVE CLUTCH COVER ASSEMBLY
(a) Align the matchmark on the clutch cover assembly with the one on the flywheel sub-assembly.
(b) Loosen each set bolt one turn at a time until the spring tension is released.
(c) Remove the 6 bolts and clutch cover assembly.
NOTE: Do not drop the clutch disc assembly.

7. REMOVE CLUTCH DISC ASSEMBLY
NOTE: Keep the lining part of the clutch disc assembly, pressure plate and surface of the flywheel sub-assembly free from oil and foreign matter.