Removal

DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY (w/o Differential Lock): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR WHEEL
3. DRAIN BRAKE FLUID
4. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY
5. REMOVE FRONT BRAKE SHOE
6. REMOVE REAR BRAKE SHOE
7. REMOVE PROPELLER SHAFT ASSEMBLY (for 2WD Driver Type, Regular Cab)
8. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for 2WD Drive Type, Except Regular Cab)
9. REMOVE PROPELLER SHAFT ASSEMBLY (for 4WD Drive Type, Regular Cab)
10. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for 4WD Drive Type, Except Regular Cab)
11. DRAIN DIFFERENTIAL OIL
12. SEPARATE REAR SPEED SENSOR LH
13. SEPARATE REAR SPEED SENSOR RH

HINT: Use the same procedure as for the LH side.

14. SEPARATE NO.3 PARKING BRAKE CABLE ASSEMBLY
15. SEPARATE NO.2 PARKING BRAKE CABLE ASSEMBLY

HINT: Use the same procedure as for the LH side.

16. REMOVE REAR AXLE SHAFT WITH BACKING PLATE
17. REMOVE REAR AXLE SHAFT WITH BACKING PLATE

HINT: Use the same procedure as for the LH side.





18. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
(a) Remove the 10 nuts and differential carrier assembly.

NOTE: Be careful not to damage the removal surface.

(b) Remove the rear differential carrier gasket from the differential carrier assembly.