Taillight Relay Circuit

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: Taillight Relay Circuit

Taillight Relay Circuit

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK TAILLIGHT
(a) Turn the light control switch to the TAIL position.
(b) Check that the taillight turns on.
OK:
Taillight turns on.
NG -- GO TO LIGHTING SYSTEM
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (ECU - BATTERY)





(a) Disconnect the J35 ECU connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE