Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM:

TERMINALS OF ECU

1. CHECK TELEVISION CAMERA ASSEMBLY





(a) Disconnect the X1 camera connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the X1 camera connector.
(d) Measure the waveform according to the value(s) in the table below.





If the result is not as specified, the camera may have a malfunction.





(e) Using an oscilloscope, check the waveform.





2. CHECK NAVIGATION RECEIVER ASSEMBLY (Pinout Values and Diagnostic Parameters)