Outer Rear View Mirror

MIRROR: OUTER REAR VIEW MIRROR:

INSPECTION

1. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH





(a) w/ Power Mirror Control System:
Check the outer mirror motor operation.
(1) Apply battery voltage and check operation of the mirror face.
OK:





If the result is not as specified, replace the mirror assembly.





(b) w/ Retract Mirror:
Check the retractable mirror's movement.
(1) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
OK:





NOTICE:
- Disconnect and reconnect the battery between each mirror position check.

- The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.

If the result is not as specified, replace the mirror assembly.





(c) w/ Door Mirror Turn Indicator:
Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(d) w/ EC Mirror:
Check the EC mirror operation.
(1) Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
OK:





If the result is not as specified, replace the mirror assembly.





(e) w/ Door Mirror Foot Light:
Check the door mirror foot light.
(1) Apply battery voltage to the terminals of the connector, and check the illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(f) w/ Mirror Heater:
Check the mirror heater.
(1) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.
2. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY LH (for Extended Type)





(a) Check the outer mirror motor operation.
(1) Apply battery voltage and check operation of the mirror face.
OK:





If the result is not as specified, replace the mirror assembly.





(b) Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(c) w/ Running Light:
Check the running Light.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(d) Check the mirror heater.
(1) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.
3. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH





(a) w/ Power Mirror Control System:
Check the outer mirror motor operation.
(1) Apply battery voltage and check operation of the mirror face.
OK:





If the result is not as specified, replace the mirror assembly.





(b) w/ Retract Mirror:
Check the retractable mirror's movement.
(1) For each position: Disconnect the battery, set the mirror position by hand, connect the battery, and check the retractable mirror's movement.
OK:





NOTICE:
- Disconnect and reconnect the battery between each mirror position check.

- The mirror position cannot be changed manually when the battery is connected. To change the mirror position manually, the battery must be disconnected first.

If the result is not as specified, replace the mirror assembly.





(c) w/ Door Mirror Turn Indicator:
Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:









(d) w/ EC Mirror:
Check the EC mirror operation.
(1) Apply battery voltage and check operation of the mirror face, as shown in the table and illustration.
OK:





If the result is not as specified, replace the mirror assembly.





(e) w/ Door Mirror Foot Light:
Check the door mirror foot light.
(1) Apply battery voltage to the terminals of the connector, and check the illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(f) w/ Mirror Heater:
Check the mirror heater.
(1) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.
4. INSPECT OUTER REAR VIEW MIRROR ASSEMBLY RH (for Extended Type)





(a) Check the outer mirror motor operation.
(1) Apply battery voltage and check operation of the mirror face.
OK:





If the result is not as specified, replace the mirror assembly.





(b) Check the door mirror turn indicator.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(c) w/ Running light:
Check the running light.
(1) Apply battery voltage to the terminals of the connector, and check the LED illumination condition.
OK:





If the result is not as specified, replace the mirror assembly.





(d) Check the mirror heater.
(1) Apply battery voltage and check the operation of the mirror heater.
OK:





HINT: It will take a short time for the mirror to become warm.

If the result is not as specified, replace the mirror assembly.