Installation

SEAT: REAR SEAT ASSEMBLY (for Double Cab):

INSTALLATION

1. INSTALL REAR SEAT ASSEMBLY





(a) Attach the 4 hooks on the back side of the seat and install it.

NOTE: Be careful not to damage the vehicle body.





(b) Install the 6 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)

HINT: Tighten the bolts in the order indicated in the illustration.

2. INSTALL REAR SEAT INNER BELT ASSEMBLY





(a) Insert the seat inner belts.
3. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (Installation)





4. INSTALL SEAT FLOOR BOX (w/ Seat Under Tray)
(a) Attach the claw to install the seat floor box.
(b) Install the 4 knobs.





5. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Seat Under Tray)
(a) Attach the hooks to install the cover. Then close the cover and turn the knob.
6. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Seat Under Tray)





(a) Attach the hooks to install the cover. Then close the cover and turn the knob.





(b) Pull the 2 seat adjusting handles and fold down the seat cushion.