Removal

2UZ-FE ENGINE MECHANICAL: ENGINE UNIT:

REMOVAL

1. REMOVE NO. 2 AIR HOSE (Removal)

2. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 1) (Removal)

3. REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 2) (Removal)

4. REMOVE IGNITION COIL ASSEMBLY (Removal)

5. REMOVE VACUUM HOSE ASSEMBLY (Removal)

6. REMOVE NO. 2 WATER BY-PASS PIPE (Removal)

7. REMOVE INTAKE MANIFOLD (Removal)

8. REMOVE AIR TUBE





(a) Remove the 3 bolts, air tube and gasket.
9. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY (Removal)

10. REMOVE NO. 4 AIR INJECTION SYSTEM HOSE
11. REMOVE AIR PUMP ASSEMBLY (Removal)

12. REMOVE STARTER ASSEMBLY (Removal)

13. REMOVE WATER INLET HOUSING (Removal)

14. REMOVE FRONT WATER BY-PASS JOINT (Removal)

15. REMOVE REAR WATER BY-PASS JOINT (Removal)

16. REMOVE OIL COOLER PIPE (Removal)

17. REMOVE NO. 2 WIRING HARNESS HEAT INSULATOR





(a) Remove the 2 bolts and heat insulator.
18. REMOVE FRONT ENGINE MOUNTING INSULATOR RH





(a) Remove the nut and mounting insulator.
19. REMOVE FRONT ENGINE MOUNTING INSULATOR LH





(a) Remove the nut and mounting insulator.
20. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH





(a) Remove the 4 bolts and mounting bracket.
21. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH





(a) Remove the 4 bolts and mounting bracket.
22. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2) (Removal)

23. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1) (Removal)

24. REMOVE VVT SENSOR (Removal)

25. REMOVE KNOCK CONTROL SENSOR (Removal)

26. REMOVE CRANKSHAFT POSITION SENSOR (Removal)

27. REMOVE VENTILATION VALVE SUB-ASSEMBLY (Removal)